Honda A269ZUA101 434MHz Remote for 1996-2009 Models

What Is the A269ZUA101 Remote?

The A269ZUA101 remote is a specialized aftermarket replacement transmitter designed for specific Honda vehicles manufactured between 1996 and 2009. Unlike standard factory keys, this remote is frequently associated with dealer-installed keyless entry systems found in models like the Honda Accord,Civic ,Insight,Odyssey,Pilot and S2000. We provide this unit as a cost-effective solution for lost or broken fobs, ensuring it meets the exact electronic specifications required to sync with your vehicle’s receiver.

Understanding FCC ID A269ZUA101 and 434MHz Specs

The most critical factor in selecting the correct remote is the FCC ID. This unit is strictly engineered for FCC ID A269ZUA101 and operates on a 434MHz frequency. Many Honda remotes look identical on the outside but run on 315MHz; these are not interchangeable. If your original remote does not explicitly match the A269ZUA101 code and 434MHz frequency, this replacement will not function.

Technical Specifications:

• FCC ID: A269ZUA101
• Frequency: 434MHz
• IC: 24223-HNV3
• Part Number: 39950-S01-A01

4 Buttons Layout and Functionality

We stock this remote in a 4 button configuration, replicating the original dealer-installed functionality. The interface is intuitive and restores full remote access to your vehicle.

• Lock: Secures all doors.
• Unlock: Disengages door locks.
• Trunk: Remote release for the rear trunk or hatch.
• Panic: Activates the vehicle’s alarm system for safety.

Matching Part Numbers and Battery Details

This remote serves as a direct replacement for part number 39950-S01-A01. It is powered by a standard 3V lithium coin battery, typically a CR2016. We ensure every unit is tested for signal strength before shipping because a weak battery is the primary cause of programming failures. Using a fresh, high-quality battery ensures the signal is strong enough to trigger the programming mode in the vehicle’s receiver.

Full Vehicle Compatibility List for A269ZUA101

Ensuring you have the correct Honda A269ZUA101 replacement is critical because Honda used multiple systems during these production years. This specific 434MHz Honda key fob is designed for vehicles equipped with the dealer-installed keyless entry system, identifiable by the FCC ID A269ZUA101 on the back of your original unit. We have verified that this remote communicates perfectly with the receiver in the following models:

• Honda Accord (1998-2002): Fits various trims requiring the Honda Accord key fob 1998-2002 spec.
• Honda Civic (1996-2000): The standard solution for Civic 1996-2000 remote replacement on units with the dealer add-on.
• Honda Insight (2000-2006): Compatible with the first-generation hybrid Honda Insight remote 2000-2006.
• Honda Odyssey (1999-2004): Restores function for the Odyssey 1999-2004 keyless fob system.
• Honda Pilot (2003-2007): Matches the Pilot 2003-2007 remote A269ZUA101 frequency requirements.
• Honda S2000 (2000-2009): The correct S2000 key fob replacement for the entire production run of this roadster.

It is important to distinguish between factory-installed and dealer-installed systems. This A269ZUA101 keyless entry remote operates at 434MHz, which is distinct from other factory remotes that may run on 315MHz. If your vehicle is a Honda dealer installed remote system, this 4 buttons configuration (Lock, Unlock, Trunk, Panic) is the exact match for part number 39950-S01-A01. Always verify the FCC ID on your broken remote or the keyless entry module under the driver’s seat to guarantee fitment.

How to Identify If This Is Your Exact Remote

Buying a replacement fob based solely on how it looks can lead to frustration. Honda manufactured several remotes during the 1996-2007 era that share the same outer shell but operate on completely different internal systems. To ensure you are buying the correct Honda A269ZUA101 replacement, you must verify specific technical details on your existing unit.

Checking the Back Label for FCC ID A269ZUA101

The most reliable way to confirm compatibility is the FCC ID. Flip your current remote over and look at the text printed on the back case. You are looking for FCC ID: A269ZUA101.

If the text on the back is worn off or illegible, you will need to open the remote case. Look for the ID printed on the inside of the plastic shell or directly on the green circuit board. This code acts as the unique identifier for your vehicle’s receiver. If your original remote has a different FCC ID, such as E4EG8DJ, this part will not work for you.

Verifying the 434MHz Frequency and Button Layout

Frequency is the most critical factor that visual inspections often miss. This specific A269ZUA101 keyless entry remote operates strictly at 434MHz. Many standard US-market Honda remotes look identical but run on 315MHz. A 315MHz system cannot receive a 434MHz signal.

In addition to the frequency, confirm the button configuration matches the 4 button Honda remote 434MHz layout:

• Lock
• Unlock
• Trunk Release
• Panic (Red button)

Visual Comparison and Internal Specs

Before ordering, perform a side-by-side visual check of your internal circuit board against our product photos. Specifically, look for the Integrated Circuit (IC) number 24223-HNV3 on the board. Ensure the battery slot is designed for a standard lithium coin battery (typically CR2016). If the FCC ID, frequency, button count, and internal layout all match, you have found the correct replacement.

OEM vs. Aftermarket Options: Which Should You Choose?

When replacing a lost or broken remote for vehicles like the 1998-2002 Accord, the dealership is often the first call, but it is rarely the most economical choice. We understand that paying premium prices for an OEM Honda keyless entry 39950-S01-A01 unit on an older vehicle doesn’t always make financial sense. Our aftermarket solutions provide the exact same functionality—locking, unlocking, trunk, and panic alarm—without the dealership markup.

We prioritize aftermarket Honda remote compatibility and reliability. Unlike cheap knock-offs found on general marketplaces, we treat our aftermarket fobs with the same rigor as factory parts. Every unit is inspected to ensure the circuit board transmits the correct 434MHz signal required by the A269ZUA101 standard.

Cost and Quality Breakdown

Here is how our aftermarket options stack up against traditional dealer sourcing:

Feature	Dealership OEM	KeylessBest Aftermarket
Price Point	High (Premium Markup)	Budget-Friendly
FCC ID Match	A269ZUA101	A269ZUA101
Signal Testing	Varies	100% Tested Before Shipping
Battery Status	Varies	Fresh Battery Installed

We ensure reliability by pre-testing every A269ZUA101 keyless entry remote for signal strength before it ships. You receive a complete unit with a fresh battery (CR2026 or CR2032) already installed, eliminating the risk of receiving a “dead on arrival” remote. This approach guarantees that the remote is ready for programming the moment it arrives at your door.

Programming Your New A269ZUA101 Remote – DIY Guide

For many owners of the 1996-2009 Honda Accord Civic Insight Odyssey Pilot S2000 A269ZUA101 434MHz system, getting your new fob to talk to your car doesn’t always require a professional. If your vehicle is equipped with the specific dealer-installed keyless entry unit associated with this FCC ID, you can often use the valet switch method. This DIY program Honda key fob A269ZUA101 process is straightforward if you know where your disarm button is located.

Prerequisites and Troubleshooting

Before starting, ensure your vehicle battery is fully charged and the new remote has a fresh battery installed. The system generally allows a maximum of four remotes to be programmed at once; programming a fifth will usually delete the oldest code. If the locks do not cycle, verify that you are using the correct 434MHz Honda key fob frequency.

Professional Programming: When and Where to Go

While many Honda A269ZUA101 replacement remotes are designed for user programming, there are times when you need an expert. If the manual sequence doesn’t take, or if your vehicle’s receiver is acting up, professional diagnostic tools are the next step.

Locksmith vs. Dealership: Cost and Convenience

Choosing the right service provider can save you time and money when syncing your 434MHz Honda key fob.

• Automotive Locksmiths: This is usually the best bet for older systems like the 39950-S01-A01. Locksmiths are often mobile, coming directly to you, and are generally 30-50% cheaper than a dealership. Most are willing to program aftermarket fobs without issue.
• Dealerships: While they have official tools, dealers often charge a minimum of one hour of labor, which can exceed the cost of the remote itself. Additionally, some service departments have policies against programming parts not purchased directly from their parts counter.

Situations Requiring Professional Equipment

Sometimes the standard DIY instructions just won’t work due to the vehicle’s internal computer state. You should seek professional help if:

• Memory is Full: The vehicle is already paired with the maximum number of remotes (usually 4), and the memory needs to be cleared via the OBDII port.
• System Mismatch: The dealer-installed system does not respond to the standard ignition cycling method.
• Receiver Issues: You suspect an issue with the vehicle’s receiver module rather than the remote itself.

Installation & Battery Replacement Tips

Keeping your Honda A269ZUA101 replacement remote functioning requires a fresh power source. Over time, signal range decreases, indicating the need for a swap. We make sure every unit we ship is ready to go, but eventually, you will need to handle this simple maintenance task yourself.

How to Safely Open the Case and Swap the Battery

You do not need special tools to replace the power source in your 434MHz Honda key fob. Follow these steps to ensure you don’t damage the internal circuit board or the plastic shell:

• Locate the Notch: Find the small indentation on the side or bottom of the remote case.
• Pry Open: Insert a small coin or a flathead screwdriver into the notch and gently twist to separate the two halves.
• Identify the Battery: These remotes typically use a CR2026 or CR2032 3V Lithium battery. Check the number on the old battery before purchasing a replacement.
• Install: Slide the old battery out and insert the new one with the Positive (+) side facing up.
• Close: Align the front and back covers and snap them firmly back together.

Testing Signal Strength After Installation

Once the new battery is in, immediate testing is crucial to ensure the A269ZUA101 keyless entry remote is communicating with your vehicle’s receiver.

1. Stand near your vehicle (within 5-10 feet initially).
2. Press the Lock and Unlock buttons firmly.
3. Observe the red LED light on the remote (if equipped) and listen for the vehicle’s door locks engaging.
4. If the remote does not respond, reopen the case and verify the battery is seated correctly and not upside down.

We test every remote for optimal signal strength before shipping to ensure quality, so a lack of response usually points to battery orientation or the need for reprogramming rather than a defect in the electronic assembly.

Why Buy Your Replacement Fob from Keylessbest?

I established this platform to provide a reliable alternative to expensive dealership prices without sacrificing quality. When you order a Honda A269ZUA101 replacement from us, you are getting a product that has been rigorously inspected. We don’t just ship boxes; we ensure the electronics inside are fully functional and ready to sync with your vehicle.

Here is what you can expect when you choose KeylessBest:

• Guaranteed Functionality: Every 434MHz Honda key fob is tested for signal strength and button responsiveness before shipping. We ensure the Lock, Unlock, Panic, and Trunk buttons transmit perfectly so you don’t receive a dead unit.
• Cost-Effective Solutions: We offer significant savings compared to OEM dealer prices. You get a high-quality aftermarket remote that fits your budget without compromising on reliability.
• Fast Shipping & Warranty: We understand the urgency of replacing a lost key. We provide fast shipping options across the US and back our products with a solid warranty for your peace of mind.
• Expert Support: Honda remote compatibility can be confusing due to different dealer-installed systems versus factory options. Our team is here to help you verify that the A269ZUA101 keyless entry remote matches your specific vehicle year and model before you buy.

Frequently Asked Questions (FAQs)

Is the A269ZUA101 remote self-programmable without a dealer?

Yes, for many vehicles using this system, you can perform a DIY program Honda key fob A269ZUA101 sequence right in your driveway. Models like the 1998-2002 Accord and older Civics typically allow you to sync the remote by cycling the ignition key and pressing the lock button in a specific pattern. However, always verify your specific model year, as some later systems might require professional tools.

What if I lost my original remote? Can I still program a new one?

Absolutely. You do not need your old, lost, or broken remote to program a Honda A269ZUA101 replacement. As long as you have the metal ignition key to turn the car on and off, you can enter the programming mode and sync the new fob to your vehicle’s receiver.

Does this fob work with the factory alarm system?

Yes, this 434MHz Honda key fob is designed to function exactly like the original equipment. It communicates directly with your vehicle’s factory or dealer-installed keyless entry unit, allowing you to lock, unlock, and activate the panic alarm just as the original did.

What is the difference between A269ZUA101 and FCC ID E4EG8DJ?

These codes represent different radio frequencies and protocols. The A269ZUA101 keyless entry remote operates specifically at 434MHz. Other codes, like E4EG8DJ, often operate at different frequencies (such as 315MHz) or use different signaling. They are not interchangeable. You must check the back of your original remote or your dealer-installed unit to ensure you are buying the correct FCC ID for your system.

Related Sources

https://fccid.io/A269ZUA101

https://www.keylessentryremotefob.com/honda-accord-oem-4-button-key-fob-a269zua101